"The BX53 upright microscope can be customized for different observation methods, such as phase contrast and fluorescence."

The Agilent 7900 ICP-MS is a flexible single quadrupole ICP mass spec instrument that provides the industry's best matrix tolerance, most effective helium collision mode, lowest detection limits, and widest dynamic range.

These optical tables have three levels of damping performance as well as a multitude of configuration options for a variety of use cases. Individual tables can even be mechanically coupled in order to create complex rigid table shapes [...]

Leak detector with rotary vane pump.

The Millennia eV from Spectra-Physics is a product family of CW DPSS green lasers providing unprecedented power levels and versatility. Millennia eV models are available with 5 W, 10 W, 15 W, 20 W, and 25 W of CW power at 532 nm. All [...]

PEFA-SP-C series (Pulsed Erbium Fibre Amplifier) are designed to amplify femtosecond and picosecond pulses without pulse distortion.

The Cryospot 4 is a cryogenic system that can be equipped with any GM cryocooler in the 0.1W - 1W capacity range and has eight input/output ports. This system is ideal when vibrations from the GM cooler will not impact your experiment. [...]

The ORIGAMI 10XP from NKT Photonics is an all-in-one, single-box, microjoule femtosecond laser. The system is based on a compact monolithic chirped pulse amplification platform capable of delivering up to 75uJ pulse energy at 1030nm, [...]

The Koheras BOOSTIK is a compact fiber amplifier module. It amplifies the Koheras seed lasers while preserving the ultra-low phase noise and narrow linewidth.

Chuck size 6 - 10inch, Bar Capacity 51 - 81mm, Max. Turning Diameter 300 - 350mm, Max. Turning Length 290 - 550mm

The Millennia eV from Spectra-Physics is a product family of CW DPSS green lasers providing unprecedented power levels and versatility. Millennia eV models are available with 5 W, 10 W, 15 W, 20 W, and 25 W of CW power at 532 nm. All [...]

The Milli-Q IQ 7003 water purification system provides Type 1 and Type 2 water quality directly from tap water at a flow rate of 3 L/hr.

The Milli-Q IQ 7003 water purification system provides Type 1 and Type 2 water quality directly from tap water at a flow rate of 3 L/hr.

The first all-in-one holographic solution that allows you to create your own 3D content without any experience in 3D animation.

The Ultimaker 2+ Connect is reliable for easy, remote 3D printing. Featuring networking capabilities and a new touchscreen will enable you to create a seamless 3D printing workflow that’s good for small enterprises and educators.

The Ultimaker 2+ Connect is reliable for easy, remote 3D printing. Featuring networking capabilities and a new touchscreen will enable you to create a seamless 3D printing workflow that’s good for small enterprises and educators.

The Ultimaker 2+ Connect is reliable for easy, remote 3D printing. Featuring networking capabilities and a new touchscreen will enable you to create a seamless 3D printing workflow that’s good for small enterprises and educators.

The Ultimaker 2+ Connect is reliable for easy, remote 3D printing. Featuring networking capabilities and a new touchscreen will enable you to create a seamless 3D printing workflow that’s good for small enterprises and educators.

EXO2 is a Multiparameter Water Quality Sonde with 7 sensor ports (including a central wiper port), optional depth sensor, and battery compartment.

The EXO Handheld offers convenient monitoring with a dedicated, streamlined interface to EXO Sondes. The ultra-rugged handheld features a backlit color display, ergonomic design, and simple operation.

This sensor measures nitrate over a wide range of environmental conditions including extremely turbid and high CDOM conditions), from blue-ocean nitraclines to storm runoff in rivers and streams.

The LI-820 is an economical high performance, non-dispersive infrared gas analyzer designed to be used for a wide variety of applications. Features include a 14 cm optical bench to measure CO2 concentrations over a range of 0 - 20000 [...]

The Fibox 3 is a proven fiber optic meter for precise oxygen measurements.

Battery powered oxygen meter with a robust and splash-proof housing. Ideal for process industries and biological and environmental applications

The Artec Leo is the first 3D scanner to offer integrated automatic processing as well as provide an intuitive workflow that makes 3D scanning as easy as taking a video.  As you scan your object, you can see the 3D replica being [...]

The Artec Leo is the first 3D scanner to offer integrated automatic processing as well as provide an intuitive workflow that makes 3D scanning as easy as taking a video.  As you scan your object, you can see the 3D replica being [...]

The Formlab Form 2 is a desktop SLA (stereolithography) 3D printer. The SLA process involves depositing a liquid resin which is cured, or hardened, into a solid material by the application of laser light.

The Formlab Form 2 is a desktop SLA (stereolithography) 3D printer. The SLA process involves depositing a liquid resin which is cured, or hardened, into a solid material by the application of laser light.

10 times as powerful as the average speedlight, with 500Ws adjustable in 1/10 f-stop increments over a 9 f-stop power range.

2500mm x 360mm Sliding Table, manual rip fence to 1310mm, cross cut with two flip over stops, overhead guard with extraction, manual height adjustment of main blade, manual tilt adjustment of saw unit and manual scribe adjustment.

The Woodman SCU10-60 laser cutting and engraving machine. Fitted with an 80–100 watt water cooled CO2 tube and 1000mm X 600mm table.

The Industrial Cabinet Saw is engineered for heavy duty cycle environments. It comprises a thicker cast iron table for added stability and precision as well as thicker gauge steel in the cabinet, rails, tube and fence.

Power output control to match power to application, with continuous or times operation.

Temperature range: -10°C to +50°C. Temperature fluctuation: ±1°C (ON-OFF control), ±0.2°C (PID control). Temperature uniformity: ±0.5°C (set 37°C, ambient 20°C, no load). Temperature program operation: 3-steps, 0.5 hr ~ 99.5 hr 1-99 [...]

Carry out clinical and research applications, featuring a simple interface and exceptional capacity in a compact design.

Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements.

Ultralow temperature freezer for sample preservation

The Leica DM4000 B features a coded 6x or 7x nosepiece, manual z-focus, and fully automated transmitted- and fluorescence axis.

Temperature range: -10°C to +50°C. Temperature fluctuation: ±1°C (ON-OFF control), ±0.2°C (PID control). Temperature uniformity: ±0.5°C (set 37°C, ambient 20°C, no load). Temperature program operation: 3-steps, 0.5 hr ~ 99.5 hr 1-99 [...]

In addition to fluorescence-based determination of chlorophyll content, the PHYTO-PAM-II provides comprehensive PAM saturation pulse analysis for differential assessment of photosynthetic performance of four algal groups within one [...]

"The D8 ADVANCE is based on the unique D8 diffractometer family platform and is perfectly designed for all X-ray powder diffraction and scattering applications."

"The Laurell WS-650-23 B spin coater is compact and packed with advanced features. This 650-series coater system will accommodate up to ø150mm wafers and 5 × 5 (127mm × 127mm) substrates, and features a maximum rotational speed of [...]

"The NanoPlus is a unique instrument that utilizes photon correlation spectroscopy and electrophoretic light scattering techniques to determine particle size, zeta potential, and molecular weight. The instrument is compact and easy to [...]

"MSK-110 is a coin cell crimper with lighter weight and a smaller footprint. The crimper is suitable for sealing various types of coin cells such as CR2032, CR2025, and CR2016 with an included die. It can also crimp CR2325, CR2450, [...]

"The DSA25 Drop Shape Analyzer is designed for determining the wettability of solids by means of the contact angle as well as the surface tension of liquids such as coating substances or adhesives."

"Featuring purpose-built accessories and integrated software to easily solve analytical issues, the Nicolet iS50 is an all-in-one materials analysis system."

"The inVia Raman microscope provides chemical specificity and sensitivity, in a non-destructive manner, with no sample manipulation and preparation required."

"Compact system capable of performing many new functions such as sensitivity (S/N 800:RMS) and ultra high-speed (60,000 nm/min) at the highest level of its class."

"The Cary 5000 UV-Vis-NIR spectrophotometer is a high-performance UV-Vis and NIR spectrophotometer with superb photometric performance in the 175–3300 nm range. "

"The ALPHA II is a compact FT-IR spectrometer with a footprint the size of a laptop. It is used for chemical analysis and enables you to do quality control, quantifications and verification of raw materials."

"The Velocity 18R delivers high capacity (Maximum 4 x 250ml), refrigerated centrifugation with a maximum speed of 18,000 RPM."

"The Q-Smart family includes the most flexible pulsed Nd:YAG laser systems in the world. Complete with automatic harmonic generator phase matching, these innovative systems insure simple operation and guarantees optimal energy [...]

"The L5M-A Laboratory Mixer is suitable for the widest range of applications – mixing, emulsifying, homogenizing, disintegrating and dissolving."

"Modular box design for easy extension."

"Modular box design for easy extension."

"The Electrospinning Machine E02 provides a desktop experimental platform for creating uniform nanofiber membranes in the laboratory."

"Used for imaging of micro and nano structures, both biological and material samples."

"The Olympus LEXT 3D measuring laser microscope is engineered to measure surface roughness with a planar resolution of 0.12 ?m and an unevenness resolution of 5 nm, which are ideal for PCB roughness applications."

"Oriel Sol3A solar simulators use a single lamp design to meet Class A requirements for not one or two, but all three performance criteria without compromising their 1 SUN output power."

"This series is an updated version of BTS 3000. It provides higher data acquisition frequency up to 100Hz to enable you get reliable DCR (Direct Current Resistance) tests. And also it has a faster system output response and more [...]