CosMx Spatial Molecular Imager (SMI) allows researchers to comprehensively map single cells in their native environment and extract deeper biological insights from a single experiment.​

It is an optical measurement system consisting of a transmitting and receiving bar. Each of these contains 96 leds (1.0416cm resolution). The leds on the transmitting bar communicate continuously with those on the receiving bar. The [...]

ArtUs is a very compact yet highly powerful application-based ultrasound device. Featured with high-speed USB3.0 interface it allows to not only increase scanning speed without compromising image quality but also provides real-time [...]

The iXon Ultra 888 is a fast megapixel, back-illuminated EMCCD camera, offering exceptional frame rates and single photon sensitivity across a large field of view.

The DxH 500 haematology analyser uses multi-dimensional, high-definition technology to characterize individual cells.

The Reflotron Sprint system is a single-test clinical chemistry system that allows measurement of 17 parameters of whole blood, plasma or serum - including liver and pancreas enzymes, metabolites, blood lipids, hemoglobin and potassium.

The Reflotron Sprint system is a single-test clinical chemistry system that allows measurement of 17 parameters of whole blood, plasma or serum - including liver and pancreas enzymes, metabolites, blood lipids, hemoglobin and potassium.

The UTS100PPV6 is a vacuum compatible stepper motor driven linear translation stage with a 100 mm travel range.

Malvern NanoSight NS300 provides high resolution size distribution and concentration measurements for individual nanoparticles while a fluorescence mode allows differentiation of fluorescing particles.

"Condensation Particle Counter 3775 is a general-purpose counter that detects airborne particles down to 4 nm. It provides highly accurate measurements over a wide concentration range from 0 to 10 7particles/cm 3."

"-89°C ultra low freezer"

"User-friendly with high cost-performance, the GC-2014 gas chromatograph is an excellent option for routine analysis."

"Capacity: 387 Litres Temperature Range: Ambient +15°C to 260°C Uniformity: ±3°C @110°C External Dimensions (WxDxH): 959 x 864 x 1220 mm"

"Steridium's Peltier cooled incubators allow a compact cooled incubator solution, where laboratory space does not allow for a cumbersom conventional compressor refrigerated incubators."

"Light capacity model BF2A has a maximum capacity of 7.5 Tonnes per hour. This dependable feeder is ideal for applications demanding top performance. Common applications include metering small quantities of dry materials or conveying [...]

"Made by Mechanical Workshop"

"Optimize processes for biogas plant operations and provide useful tools for biogas analysis, research and development with the goal to optimize digester operation and maximize methane production."

"Speed: 500-4000 RPM in 10 RPM Steps. Max Rcf: 2200 G"

"Optimize processes for biogas plant operations and provide useful tools for biogas analysis, research and development with the goal to optimize digester operation and maximize methane production."

"Oven Forced Air 240L with 2 Shelves. Ideal for drying and sterilisation with reduced processing time. Temperature range 5°C above ambient to 250°C."

"Suitable for safe treatment of microbiological cultures. The INCUCELL line produces no noise and provides a very soft air convection within the chamber."

"Suitable for safe treatment of microbiological cultures. The INCUCELL line produces no noise and provides a very soft air convection within the chamber."

"The HettCube 200/R incubator, max. internal volume 150L w/ optional cooling. ± 1°C above ambient, compact footprint, touchscreen interface, quiet operation."

"Suitable for safe treatment of microbiological cultures. The INCUCELL line produces no noise and provides a very soft air convection within the chamber."

"A uniform engraving image and cut the finest details thanks to the best power stability and a fine laser spot."

"General purpose metal bending"

"With a high-quality machined worktop, ribbed and die-cast from aluminium, this machine is suitable for precise work, using drills of diameters as small as 0.5mm."

"Quiet and built-in vacuum system, energy-efficient quartz heaters, safety interlock and Mono HMI operating interface of the 450DT will help you achieve consistent formings."

"The MK3S+ includes a heatbed with removable PEI spring steel print sheets, automatic Mesh Bed Leveling, filament sensor, power loss recovery (power panic) and safety features."

"Centrifuge 5804 R is a high-speed benchtop centrifuge for medium-throughput that accommodates tubes, bottles, and plates."

"These balances offer maximum support when used as inspection, measuring and test equipment within a quality system."

"An optimal, simple ultrapure (Type 1) water solution for sensitive lab applications"

"The OM11 is a compact bench top orbital mixer within a temperature controlled cabinet."

"TSI's Electrostatic Classifiers 3080 produce highly monodisperse, submicrometer aerosol. They have been used in a variety of aerosol-generation or particle-sizing applications with highly accurate and repeatable results."

"This Olympus BX51 fluorescence microscope is equipped with a trinocular head, 10x eyepieces, and UPLANFL objectives."

"Icanclave D are benchtop steam sterilizers with Class B pre & post vacuum type, complies with the European standard EN13060."

"Real-time PCR cycler and High Resolution Melt analyzer with 5 channels"

"Simultaneously measure PM Fine (PM-2.5), PM Coarse, and PM-10 mass concentrations with the TEOM 1405-D Continuous Ambient Particulate Monitor."

"SensiQ Technologies offers a suite of instruments and platforms for biomolecular interaction analysis using Label-Free Surface Plasmon Resonance (SPR) technologies."

"The Spraytec laser diffraction system allows measurement of spray particle and spray droplet size distributions in real-time for more efficient product development of sprays and aerosols. It has been specifically designed to address [...]

"The HYPROP 2 is ideal for measurements in the wet range of soils (0 to -100 kPa range). When used in combination with the WP4C Dewpoint Poteniameter, a complete SWCC from fully wet to air dry soils (-300 MPa) can be completed."

"The WP4C dew point Hygrometer is a fast, accurate way to measure water potential in any porous material. Typically used to analyze soil, soilless substrates, plant material and seeds, it has been used to measure a variety of unusal [...]

"The plastic limit determines the lowest moisture content of a soil, by wich a sample can be rolled into threads Ø 3 mm without breaking the same neither longitudinally or transversely."

"The Humiditherm TRH-460 by Thermoline Scientific features a temperature range of +5°C to +80°C and a humidity range of 10% to 90% RH."

"The 5980 Series electromechanical universal testing systems can perform tensile, compression, bend, shear and other mechanical testing up to 600 kN force."

"The Baron M110, is both powerful and efficient. Its primary features include;110 litre capacity,easy manoeuvrability, durability and suitability for resin bound aggregates."

"The 6800 Series Multi-Station System offers enhanced throughput with its ability to perform simultaneous, independent tests on up to five (5) separate specimens using a single load frame. Based on our standard 68TM-30 testing frame [...]

"Thermoline's Australian Made drying ovens are designed to remove moisture from products and samples. Dwell time feature, 500 Litre, 3060 Watts 13 Amps/240V."

"Thermoline offer accurate and precise control of temperature and humidity. These high-performance models have the ability to perform heating, cooling, humidification and dehumidification functions."

"Thermoline's Australian Made drying ovens are designed to remove moisture from products and samples. Dwell time feature, 500 Litre, 3060 Watts 13 Amps/240V."

"Automatic 2000kN Cube and Cylinder Compression Machine designed to test 100mm, 150mm and 200mm cubes and cylinders up to 320mm long Fully compliant with BS EN 12390-4 in terms of Force measurement &the stringent stability, [...]

Thermoline offer accurate and precise control of temperature and humidity. These high-performance models have the ability to perform heating, cooling, humidification and dehumidification functions.

"The ShearTrac III system can perform the consolidation and shearing phases on large size samples under fully automatic control."

"The M300 is equipped with Strong mixer arm, easy-to-replace steel mixer shovels. It is easy to move by a single person; even at the construction site , thanks to the large robust pneumatic tiers makes it easy to move."

"The Industrial Series is comprised of high-capacity, hydraulic testing systems for tension, compression, and flexural applications."

"The ELDYN system supersedes systems using pneumatic actuators in terms of life costs and overall usable performance. Electro-mechanical systems can carry out full load dynamic testing to the stated frequency. Pneumatic systems tend to [...]

"Ideal for general vacuum drying, vacuum embedding, moisture testing and dessicating temperature up to 250C and 760mm Hg vacuum"

"The Gilson model HM-382 Digital Pneumatic Direct Shear Machine is a tabletop unit that provides direct or direct/residual shear values for evaluating the strength and stability of soils."

"The 1500F2, 15 Bar Pressure Plate Extractor, is used to analyze the water-holding characteristics of soil samples throughout the pressure range of interest in most agricultural applications. The pressure vessel is 4in (10 cm) deep and [...]

"Slake Durability Apparatus is used in simulated weathering tests to determine abrasion resistance in wetting and drying cycles of shale and similar soft rocks in embankments and other construction-related applications."